small jaw crusher machine for sand making plant
Brief Introduction of Jaw Crusher:
| working principle | Firstly the machine’s leather belt and wheel are driven by the electric motor, then the movable jaw plate begins to move up and down by the eccentric shaft, when the movable jaw plate moves from top to bottom, the angle between fixed jaw plate and movable jaw plate becomes smaller, the material is crushed into pieces to reach the crushing target. When the movable jaw plate moves from bottom to top, the angle between fixed jaw plate and movable jaw plate becomes bigger, the movable jaw plate deviates from the fixed jaw plate under the function of drag rod and spring, at this moment, the crushed material is discharged from the bottom outlet of the crushing cavity. |
| Advantages | 1.The broken cavity is deep and without dead zone, increased capacity and output feed |
| 2.More energy conservation: stand-alone can save energy by 15%-30% and system’s energy conservation can be more than twice | |
| 3.The toggle plate and the swing jaw have the function to avoid the horizontal deflection | |
| 4.Large crushing ability as the primary crusher machine | |
| Application | 1. This group of crushers mostly are useful for metallurgical, mining, chemical, cement, construction, fireproof materials and ceramics along with other industrial sector in secondary and tertiary crushing, dealing with various hard minerals and rocks. 2. The most appropriate anti-pressure strength for this number of crushers will be the materials(minerals, rocks, slag) no more than 280Mpa. The feeding sized materials should not be a larger than the specification within the technical parameter. |
Technical parameters:
Model |
Feed Opening (mm) |
Max. Feed Size (mm) |
Capacity (t/h) |
Power Consumption (kw) |
Discharge Opening (mm) |
Overall Dimension (L x W x H) (mm) |
PE-150×250 |
150×250 |
125 |
1-5 |
5.5 |
10-40 |
758×758×794 |
PE-250×400 |
250×400 |
210 |
5-20 |
15 |
20-60 |
1500×1400×900 |
PE-400×600 |
400×600 |
340 |
16-65 |
30 |
40-100 |
1700×1800×1600 |
PE-500×750 |
500×750 |
425 |
50-100 |
55 |
50-100 |
1890×1940×1870 |
PE-600×900 |
600×900 |
500 |
50-120 |
55 |
65-160 |
2395×1843×2230 |
PE-750 ×1060 |
750×1060 |
630 |
52-180 |
110 |
80-140 |
2775×2426×2840 |
PE-800×1060 |
800×1060 |
640 |
136-230 |
110 |
100-200 |
2500×2472×2810 |
PE-900×1200 |
900×1200 |
750 |
140-260 |
110 |
95-165 |
3400×3200×3500 |
PE-1000×1200 |
1000×1200 |
850 |
315-342 |
110 |
195-265 |
3335×3182×3430 |
PE-1200×1500 |
1200×1500 |
1020 |
400-800 |
160 |
150-300 |
4200×3732×4620 |
PE-250 ×750 |
250×750 |
210 |
15-30 |
22 |
15-70 |
1400×1300×1350 |
PE-250×1000 |
250×1000 |
210 |
16-52 |
30 |
25-60 |
1600×2000×1500 |
PE-250 ×1200 |
250×1200 |
210 |
20-60 |
37 |
25-60 |
1900×2200×1500 |
PE-300×1300 |
300×1300 |
260 |
30-70 |
55 |
30-90 |
1800×2300×1700 |
The above is only part of the information, if we want more information please contact us.
Tel:86-373-3669005 Cell:86-15136770681 Fax:86-373-3669006 small jaw crusher machine for sand making plant1446091623
Welcome to visit our factory and look forward your cooperation
Jaw Crusher Machine is fit for dry and wet sieving, classification of powdery, granular and filamentary materials and dehydration of materials. If fine sieving is required small jaw crusher machine for sand making plant can be satisfied by adopting high-efficiency screen mesh-cleaning device to improve the sieving. For wet sieving small jaw crusher machine for sand making plant is especially fit for separation of sludge (waste water) and preliminary compression of mixed matter of solid and liquid materials.
hhhghj
Jaw Crusher Machine can do according to customers special demands. We provide our customers with high-quality Jaw Crusher Machine, advanced production technology and perfect after-sales services.small jaw crusher machine for sand making plant Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction.
YHAYAG