Sea Sand washing machine for mining from Dahua manufacture

2013 Sand Washing Machine for Sale

1.Sand Washing Machine Introduction

Sand washing machine an artificial sand (including natural sand) washing

equipment. Sand washing machine is widely used in gravel pits, mining, building

materials, transportation, chemical industry, water utilities, concrete mixing

stations and other industries in the washing of the material. Sand washing

machine can be divided into two types: GX type and XL type. It can remove the

impurities covered the surface of sand and gravel, while damage to the water

vapor coated the layer of sand to facilitate the dehydration, plays washing

sand cleaning role.

2.Sand Washing Machine Working Principle:

1.When the sand washing machine is working, after slow down when go through the triangle, decelerator, gear wheel in proper order, the motor will drive the impeller to move slowly.

2.Then the sand is sent into the wash tank through the feeder, in the driven of the impeller, and grinding with each other, the impurity covered onto the sand is eliminated, at the same time, the vapor layer which is on the surface of the sand is also destroyed, so as to dehydrate.

3.At the same time, feed water that forms strong flow, so as to take away the impurity and the foreign matter in low proportion timely, and expelled from the overflow export, so as to achieve the purpose of cleaning.

4.The clean sand is taken away by the blade, at last the sand is sent into the outlet tank from the rotary blade, so as to achieve the purpose of cleaning.

Application of Dongfang Screw sand washing machine :

3:Application of Screw sand washing machine :

Sand washing machine are mainly used in building site, gravel plant, concrete dam

building site of hydropower station, etc., and with features of high degree cleaning-up, reasonable structure, large capacity, low power consumption, small loss of the sands

during the washing process, especially for that the drive parts of the sand washing machine are

separated from water and sands. So that it has lower failure rate than the usual sand washing machine.

4.Work Principle Screw sand washing machine :

The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel.

The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other.

The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder.

5.Advantages of Screw sand washing machine :

Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly,

the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone;

on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.

6.Service for Screw Sand washing machine:

Delivery time: within 20 days after received your down payment.

Warranty: One Year (Calculated from the goods arrived the destination port.) If any parts (excluding easily damaging parts) are found defective in quality in the first year,

we shall replace it free-of-cost. After one year, parts can be replaced on favorable payment basis.We can send our engineer to provide the installation and trial run in your place. But the relevant cost

shall be bear in your account (round trip air ticket, board and lodging).

We insist on "Quality is the soul of company" and take customers as our god, owned outstanding R&D team with the sense of innovation and cooperation, timely and effectively after-sales service team, professional installation guidance team with 10 years experience. We devote to all-round service of all the products from shipment to maintenance.

7:Specification: of the sand washing machine

8:pictures of the sand washing machine

Driven by electric motor and decelerator, the impeller of sand washing machine moves in a circle in the water groove, thus make the sand or slag pellets mixed, overturned, cleaned and discharged in the water groove.Sea Sand washing machine for mining from Dahua manufacture There is little loss for medium-sized and fine sand and stone powder. Sand Washing Machine The grade and the fineness of the sand for construction after being washed can be up to the national standards, such as sand for construction and cobble and broken stones for construction. There are no other wear parts except the screen mesh. Sand Washing Machine has longer service life and little maintenance chance.
JHGVHGCD
Sea Sand washing machine for mining from Dahua manufacture Zenith sand making machine can be used in Pebble,rock( the limestone, granite, basalt, aluminum, andesite, etc.), ore tailings, slags, artificial sand production. Sand making machine can be used in Building aggregate, highway, asphalt concrete and cement aggregate production.Sea Sand washing machine for mining from Dahua manufacture As well as stone reshaping production in water conservancy and hydropower engineering field,highway, railway, bridge, passenger line, airport runway, municipal engineering and high-rise buildings.finely process of mining areas. Sand Washing Machine Building materials,mining,metallurgy, chemical industry,cement,abrasive,refractory material, etc.With high abrasive materials resistance and secondary disassembly, desulphuration of thermal power and metallurgy, slag and construction waste. Sea Sand washing machine for mining from Dahua manufacture Sand making machine also can be used in the production of glass,quartz sand and other high purity material.