Roller crusher
introductions of rollor crusher
Roller crusher (also called double roller crusher, roll crusher) is a kind of ancient crusher.It has large feeding size, and adjustable discharging size, suitable for crushing the compressive strength of the material which is below 160MPa. Especially for the coal industry,use this machine to crush the raw coal.
features
1.Install the PDGII roller crusher in the grinding system,can make the grinding equipment production capacity into full play. Generally can increase the yield of 30/40%, and total energy consumption can be reduced by 20%-30%.
2. Compact structure, light weight, small volume, compares with the same production capacity requirements of the grinding system, PDG-II roller crusher on the roll crusher can save investment significantly.
3. simple structure, small occupied space, convenient operation and repair.
4. The interior is equipped with dust board, the sealing performance is good, to avoid crushed fine material’s splash, has little dust and low noise, greatly improve the working environment.
5. Abrasive roller body has optimized the design, it need not change mill roller body all the life, but the old type roller machine need to be disassembled for repair after using a year, and replace the roller body.
6. The roller crusher is equipped with a replaceable wear resistant lining board, which adopted domestic advanced wear resistant materials. Its has the advantages of long service life, not easy to damage, convenient repair etc. Continuous service life can up to one year, when it severes wear, shift the boot cover can be replaced. Small amount of maintenance and low cost, This is unmatched by any other domestic type of crusher.
7. Simple reasonable structure, low operation cost, stable operation, high efficiency and energy saving, high grinding efficiency, discharging granularity can be adjusted.
Technical Parameters
type |
Feeding size(mm) |
Discharging size(mm) |
output(t/h) |
motor(kw) |
2PG400×250 |
≤25 |
1-8 |
5-10 |
11(5.5×2) |
2PG610×400 |
≤40 |
1-20 |
13-35 |
30(15×2) |
2PG750×400 |
≤60 |
0.5-20 |
15-40 |
30+30 |
2PG700×400 |
≤60 |
0.5-20 |
15-40 |
30+30 |
2PG750×500 |
≤80 |
0.5-20 |
15-45 |
37(30+30) |
2PG900×500 |
≤90 |
0.5-40 |
20-50 |
45×2 |
2PG800×600 |
≤60 |
0.5-30 |
10-100 |
45×2 |
2PG800×800 |
≤60 |
0.5-30 |
15-100 |
45×2 |
2PG800×1200 |
≤60 |
0.5-25 |
30-250 |
55×2 |
2PG1000×800 |
≤80 |
0.5-30 |
15-130 |
55×2 |
2PG1200×900 |
≤90 |
0.5-30 |
30-250 |
75×2 |
2PG1200×1000 |
≤90 |
0.5-30 |
30-250 |
75×2 |
2PG1200×1200 |
≤90 |
0.5-30 |
40-350 |
90×2 |
2PG1600×1200 |
≤110 |
0.5-30 |
60-420 |
110×2 |
2PG1600×1600 |
≤110 |
0.5-30 |
75-550 |
132×2 |
For more detailed information, don't hesitate to ask me!
Skype ID: wanqi182
Mob:15838031116
Tel:ores and rocks crusher/small crusher WITH LOW PRICE AND HIGH QUALITY sold by manufacturer86596711
ores and rocks crusher/small crusher WITH LOW PRICE AND HIGH QUALITY sold by manufacturer 1684465973
Fine Crusher, gold hammer mill price is applicable for both dry and wet crushing.ores and rocks crusher/small crusher WITH LOW PRICE AND HIGH QUALITY sold by manufacturer grinder hammer mill crusher machine is widely used for medium or fine crushing Fine Crusher for medium hard and brittle materials by departments of mine, cement,ores and rocks crusher/small crusher WITH LOW PRICE AND HIGH QUALITY sold by manufacturer coal,building material, metallurgy, Fine Crusher chemical industry, road construction,gas chemical industry and ores and rocks crusher/small crusher WITH LOW PRICE AND HIGH QUALITY sold by manufacturer thermal power generation, etc. Coal gangue,coke, slag, limestone, phosphate rock, salt, whiting, gypsum stains,alum, brick and tile, etc.
HSFGYGDJ
When the Fine Crusher is working, materials are crushed primarily in the first crushing chamber by the high speed moving rotor against the hammer, and then enter the secondary chamber for fine crushing, at last, the final materials are discharged.ores and rocks crusher/small crusher WITH LOW PRICE AND HIGH QUALITY sold by manufacturer adopts "stone-stone" principle with a huge arc-shaped crushing cavity, which is a screen cavity with grate seam
JHBJHVJK