CS series durable spring cone crusher machines 
FIRST: Brief Product Description
Shanghai Dingbo Spring cone crusher is widely applied in metallurgical, construction, road building, chemical and phosphatic industry. Cone crushers are suitable for hard and mid-hard rocks and ores, Spring cone crushers designed with final size 3-60mm, used to crusher, Marble, Silica sand, Dolomite, Basalt, Quartz, Feldspar, Limestone, Granite, Slag. The type of crushing chamber depends upon size of feeding and fineness of crushed product. The standard type (PYB) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.
SECOND: Working Principle
During operation, the motor of spring cone crusher crushes drives the eccentric shaft shell to turn around through a horizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wall is close to the roll mortar wall from time to time. In this way, the ores and rocks will be pressed and crooked and crushed. To ensure the precision of thrust bearing installation in spring cone crusher, installation must be the following steps: first, the installation of the thrust bearing should be same to steps of scratching; jaw plate placed in a case back should be smooth,if case back has the burr and the remaining sand,please clean up.Then pour lubricating oil to just the top of jaw plate. then install the middle circle plate and circle plate. Finally, install the air eccentric shaft, spherical tile racks, and spindle. When installing air eccentric shaft,the big gear weight should be placed in the top of small gear,so that the outer end of bevel gear is alignment. After spherical wham installed, the gap between spherical bearing seat and the main machine is as big as possible .
THIRD: Main Technical Parameters
Model |
Chamber |
Max. Feeding Size(mm) |
Discharge Opening Size(mm) |
Power (kw) |
Discharging Opening Range(mm) |
Capacity (t/h) |
Weight (t) |
DBS39 |
C |
160 |
13 |
90-110 |
13-38 |
70-215 |
10.8 |
M |
115 |
10 |
10-25 |
55-135 |
|||
F |
80 |
8 |
6-19 |
47-90 |
|||
DBS45 |
C |
180 |
13 |
110-132 |
13-38 |
105-220 |
15.5 |
M |
130 |
10 |
10-25 |
72-170 |
|||
F |
90 |
10 |
6-19 |
70-125 |
|||
DBS51 |
C |
200 |
16 |
132-160 |
16-51 |
135-350 |
22.3 |
M |
150 |
13 |
13-25 |
105-180 |
|||
F |
102 |
10 |
10-19 |
80-140 |
|||
DBS54 |
C |
215 |
19 |
185-220 |
19-51 |
200-440 |
26.3 |
M |
160 |
16 |
16-25 |
160-230 |
|||
F |
115 |
13 |
13-22 |
150-240 |
|||
DBS59 |
C |
235 |
22 |
180-220 |
19-64 |
230-570 |
37.75 |
M |
175 |
19 |
19-38 |
215-330 |
|||
F |
130 |
13 |
13-25 |
180-285 |
|||
DBS65 |
C |
267 |
22 |
250-300 |
22-64 |
330-725 |
44.3 |
M |
203 |
16 |
16-25 |
240-330 |
|||
F |
140 |
13 |
10-19 |
190-330 |
Cone Crusher Machine is a complete mobile crushing and screening plant which consists of raw material bins which located on one or more trailers, vibrating feeders, primary crushers, multi-layer vibrating screens, secondary crushers, fine crushers, mobile belt conveyors, sand washers, electric control systems and etc.; CS series durable spring cone crusher machines is applicable to the mobile crushing processes in highway, railway, metallurgy, ore mine, construction and other industries.
YHGGUH
Cone Crusher Machine can be used in Pebble, rock (the limestone, granite, basalt, aluminum, andesite, etc.), ore tailings, and slags. CS series durable spring cone crusher machines can be used in Building aggregate, highway, asphalt concrete and cement aggregate production. Cone Crusher Machine As well as stone reshaping production in water conservancy and hydropower engineering field, highway, railway, bridge, passenger line, airport runway, municipal engineering and high-rise buildings finely process of mining areas.CS series durable spring cone crusher machines
YHGUJ