Sealed Jaw Crusher is applicable to medium and fine crushed materials for the purposes of laboratory and production and primarily provided as environmental protection equipment for coal, electric power, mine, geology, chemical, metallurgy, building material and other industries. The product is produced by the only enterprise designated by the former Ministry of Geology and Mineral Resources, in compliance with the Industrial standards. 
XPC Model Sealed Jaw Crusher is a new generation of crushing equipment with easy open of dynamic and static jaws, convenient clean-up and no blending of samples. It is capable of fine and medium crushing a variety of ores and materials with compressive strength of 24kg/cm2 and below. with great crushing ratio, uniform particle size and adjustment of output size.
Model |
Capacity |
Inlet size |
Feed size |
output size |
Rotating speed |
power |
Weight |
|
kg/h |
mm |
mm |
mm |
r/min |
kw |
kg |
XPC60×100 |
≤400 |
60×100 |
≤50 |
1-3 |
650 |
1.5 |
110 |
XPC100×150 |
≤1800 |
150×100 |
90 |
5-25 |
380 |
2.2 |
190 |
XPC100×125 |
≤600 |
125×100 |
80 |
1-6 |
380 |
3 |
360 |
XPC150×125 |
≤200 |
150×125 |
100 |
6-38 |
375 |
3 |
417 |
XPC150×200 |
≤2000 |
200×150 |
≤120 |
5-30 |
375 |
5.5 |
450 |
XPC150×250 |
≤3000 |
150×250 |
≤125 |
10-40 |
3750 |
5.5 |
500 |
Model |
Capacity |
Inlet size |
Feed size |
output size |
Rotating speed |
power |
Weight |
kg/h |
mm |
mm |
mm |
r/min |
kw |
kg |
|
SP60×100 |
≤720 |
100×60 |
48 |
0.8-15 |
300 |
2.2 |
330 |
SP100×100 |
≤800 |
100×100 |
80 |
0.8-15 |
350 |
3 |
400 |
PEX100×100 |
≤960 |
100×100 |
80 |
Accounts for 96% |
600 |
2.2 |
300 |
PEX100×125 |
45-600 |
100×125 |
≤80 |
1-15 |
600 |
3 |
450 |
PEX125×125 |
≤1600 |
125×125 |
110 |
1-15 |
600 |
3 |
3000 |
MPE100×150 sealed |
45-600 |
100×150 |
80 |
1-15 |
420 |
3 |
450 |
MPE100×250 sealed |
300-100 |
100×250 |
80 |
1-8 |
420 |
4 |
700 |
Impact Rock Crusher is used for primary, secondary and fine crushing of all kinds of stones and rocks with compressive strength less than 350 MPa such as granite, marble, and limestone.Gold mining crusher for gold mine plant is widely used for sand and rock production in the industry of roads, railways, reservoir, electricity power, building materials and so on.
JHDGFHVB
When the Gold mining crusher for gold mine plant works, the motor drives the rotor to rotate with high speed, on the rotor where installed the hammers. When the materials get into the area which the hammers effect, under the impact function of the hammer at a high speed, the materials are thrown to the impact device above the rotor continuously. Impact Rock Crusher And then the materials are rebounded from the impact liner to the area where the hammers effects for being recrushed. Gold mining crusher for gold mine plant The materials from large to small all to be crushed at the impact chamber repeatedly. The process won’t stop till the material are crushed to the required size and then discharged from outlet.
JKKJBLK