PCL shaft impact crusher for fine crushing
PCL vertical shaft impact crusher
PCL vertical shaft impact crusher is widely used for fine crushing and coarse grinding in mining, rocks, fireproof materials, glass raw material and metallurgy residues. The impact crusher is much more professional than other crushers in crushing hard and anti-abrasion materials such as carborundum, sintered bauxite, magnesite and so on. The Impact Crusher is usually used as sand making machine in the sand washing plant.
1. Operating Principle
The materials fall into the crusher and be divided into two parts. One part goes into the high-speed-running impeller of the machine, and the other part goes around the impeller. The two parts materials fast bump and crush during the effect of centrifugal force. Then the materials run like swirl, bump and rub to each other again and again. The finished products go out from the bottom of the machine, and users can get the requested products size after screening by vibrating screen.
2. Features
(1) Simple structure and low investment cost.
(2) High efficiency and low consumption.
(3) Scaleboard of the impeller is easy in maintenance and seldom damaged.
(4) With the function of fine crushing and coarse grinding.
(5) Slightly infPCL shaft impact crusher for fine crushingced by the moisture content of the material. The max moisture content is 8%.
(6) Suitable for crushing materials of middle hardness and high hardness.
(7) Cubic shaped finished products, high density of piling up and low iron pollution.
(8) Working noise
3. Technical data
Model |
Impeller Speed (rpm) |
Max. Feeding Size (mm) |
Capacity (t/h) |
Motor Power (kw) |
Weight (t) |
Overall Dimension (mm) |
PCL-600 |
2000-2600 |
30 |
12-30 |
2*30 |
5.6 |
2800*1500*2030 |
PCL-750 |
1500-2500 |
35 |
25-55 |
2*45 |
7.3 |
3300*1800*2440 |
PCL-900 |
1300-1700 |
40 |
50-80 |
2*55 |
12.1 |
3750*2120*2660 |
PCL-1050 |
1100-1450 |
45 |
70-120 |
2*110 |
16.5 |
4480*2450*2906 |
PCL-1250 |
950-1200 |
45 |
80-160 |
2*132 |
22 |
4563*2650*3176 |
PCL-1350 |
800-1200 |
50 |
120-220 |
2*160 |
26 |
5340*2940*3650 |
Impact Rock Crusher is used for primary, secondary and fine crushing of all kinds of stones and rocks with compressive strength less than 350 MPa such as granite, marble, and limestone.PCL shaft impact crusher for fine crushing is widely used for sand and rock production in the industry of roads, railways, reservoir, electricity power, building materials and so on.
JHDGFHVB
When the PCL shaft impact crusher for fine crushing works, the motor drives the rotor to rotate with high speed, on the rotor where installed the hammers. When the materials get into the area which the hammers effect, under the impact function of the hammer at a high speed, the materials are thrown to the impact device above the rotor continuously. Impact Rock Crusher And then the materials are rebounded from the impact liner to the area where the hammers effects for being recrushed. PCL shaft impact crusher for fine crushing The materials from large to small all to be crushed at the impact chamber repeatedly. The process won’t stop till the material are crushed to the required size and then discharged from outlet.
JKKJBLK