Used cone crusher brief introduction,
Spring Cone Crusher is suitable to crush various kinds of ores and rocks of medium or above medium hardness. Compared with Jaw Crusher, Spring Cone Crusher has its own advantage of stable structure, high efficiency, easy adjustment, and economical using etc.
Used cone crusher working principle,
Spring Cone Crusher crushes materials by the working surface between the movable cone and fixed cone. So it is more advanced and efficiency than Jaw Crusher. The movable cone is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is driven by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequently the output size is determined
Used cone crushser technical parameter list,
| Model | Feeder size(mm) | Max feed size |
Range of output opening(mm) |
Capacity (t/h) |
Power (kw) |
Shaft speed(r/m) | Total Wt.(t) |
Dimension (mm) |
PYB600 |
75 |
65 |
12-15 |
40 |
30 |
356 |
5 |
2234×1370×1675 |
PYD600 |
40 |
35 |
3-13 |
12-23 |
30 |
356 |
5.1 |
2234×1370×1675 |
PYB900 |
135 |
115 |
15-50 |
50-90 |
55 |
333 |
11.2 |
2692×1640×2350 |
PYZ900 |
70 |
60 |
5-20 |
20-65 |
55 |
333 |
11.2 |
2692×1640×2350 |
PYD900 |
50 |
50 |
3-13 |
15-50 |
55 |
333 |
11.3 |
2692×1640×2350 |
PYB1200 |
170 |
145 |
20-50 |
110-168 |
110 |
300 |
24.7 |
2790×1878×2844 |
PYZ1200 |
115 |
100 |
8-25 |
42-135 |
110 |
300 |
25 |
2790×1878×2844 |
PYD1200 |
60 |
50 |
3-15 |
18-105 |
110 |
300 |
25.3 |
2790×1878×2844 |
PYB1750 |
250 |
215 |
25-50 |
280-430 |
160 |
245 |
50.3 |
3910×2894×3809 |
PYZ1750 |
215 |
185 |
10-30 |
115-320 |
160 |
245 |
50.3 |
3910×2894×3809 |
PYD1750 |
100 |
85 |
5-13 |
75-230 |
160 |
245 |
50.2 |
3910×2894×3809 |
PYB2200 |
350 |
300 |
30-60 |
590-1000 |
280 |
220 |
80 |
4622×3302×4470 |
PYZ2200 |
275 |
230 |
10-30 |
200-580 |
280 |
220 |
80 |
4622×3302×4470 |
PYD2200 |
130 |
100 |
5-15 |
120-340 |
280 |
220 |
81.4 |
4622×3302×4470 |
1. Spring Cone Crusher High-efficiency: Hengchang used spring cone crusher (PYD 1200) uses optimized structure such as, fixed axis, small spherical bearing, which make the efficiency is 5%-15% higher than the efficiency of traditional cone crusher.
2. Spring Cone Crusher Large capacity: The perfect combination of broken stroke, Hengchang used spring cone crusher (PYD 1200) broken speed and crushing chamber makes the capacity is 35%-65% larger than the capacity of traditional cone crusher under the same broken cone size.
3.Spring Cone Crusher High quality stone: Hengchang used spring cone crusher (PYD 1200) uses special laminated crushing principle resulting in the crushing effect of particles, so that the proportion of cube in the output clearly increased, the flake stone needless reduced and the grain size more uniform.
JHBJGSXS
4. Spring Cone Crusher More smoothly operation: When iron and other hard objects that cannot be broken into the machine,Hengchang used spring cone crusher (PYD 1200) the over iron protection equipment will released the objects and then reset immediately.
5. Spring Cone Crusher Multi-split hydraulic lubrication control system can ensure the double protection of the bush and overload protection.
JHVAJSHGVC
Hengchang used spring cone crusher (PYD 1200) pyd 1200 with high-efficiency and hydraulic pressure was widely used in mining, concrete factory, sand stone making, etc. Spring Cone Crusher's pressure resistance strength is under 350Mpa. And Hengchang used spring cone crusher (PYD 1200) pyd 1200 are widely suitable for primary crushing of many kinds of mining and rock such as many kinds of ores, concrete, fireproof material, bauxite, quartzite, corundum, perlite, ironstone, basalt, etc