Industrial pegson spring cone crusher heavy equipment
FIRST: Brief Product Description
Shanghai Dingbo Spring cone crusher is widely applied in metallurgical, construction,building materials, chemical ,silicate and phosphatic industry,applicable to crush various konds of ores and rocks of medium or above medium hardness,and cone crusher is of big crushing ration,high efficiency,large capacity,low cost,easy adjustment,and use economically,etc. Cone crushers are suitable for hard and mid-hard rocks and ores, Spring cone crushers designed with final size 3-60mm, used to crusher, Marble, Silica sand, Dolomite, Basalt, Quartz, Feldspar, Limestone, Granite, Slag. The type of crushing chamber depends upon size of feeding and fineness of crushed product. The standard type (PYB) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.The reasonable part selection and structural design extend crushers'usage life,and medium to large-sized crusher,adopts the hydraulic clear-cavity system,reduce downtime and various types of crusher cavity to better adapt to users'needs.
SECOND: Working Principle
During operation, the motor of spring cone crusher crushes drives the eccentric shaft shell to turn around through a horizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wall is close to the roll mortar wall from time to time. In this way, the ores and rocks will be pressed and crooked and crushed. To ensure the precision of thrust bearing installation in spring cone crusher, installation must be the following steps: first, the installation of the thrust bearing should be same to steps of scratching; jaw plate placed in a case back should be smooth,if case back has the burr and the remaining sand,please clean up.Then pour lubricating oil to just the top of jaw plate. then install the middle circle plate and circle plate. Finally, install the air eccentric shaft, spherical tile racks, and spindle. When installing air eccentric shaft,the big gear weight should be placed in the top of small gear,so that the outer end of bevel gear is alignment. After spherical wham installed, the gap between spherical bearing seat and the main machine is as big as possible .
THIRD: Main Technical Parameters
Model |
Moving cone Diameter(mm) |
Feeding opening size(mm) |
Discharging Opening size(mm) |
Max feeding Size(mm) |
Capacity (t/h) |
Eccentric Rotating speed(r/min) |
Power (kw) |
Weigh (kg) |
Overall Dimension (mm) |
PYB-600 |
600 |
75 |
12-25 |
65 |
12-25 |
356 |
30 |
5 |
2800*1300 *1700 |
PYD-600 |
40 |
2-13 |
35 |
5-23 |
5.5 |
||||
PYB-900 |
900 |
135 |
15-50 |
115 |
50-90 |
333 |
55 |
11.2 |
3050*1640 *2350 |
PYZ-900 |
70 |
5-20 |
60 |
20-65 |
11.2 |
||||
PYD-900 |
50 |
3-13 |
50 |
15-50 |
11.3 |
||||
PYB-1200 |
1200 |
170 |
20-50 |
145 |
110-168 |
300 |
110 |
24.7 |
4152*2300 *2980 |
PYZ-1200 |
115 |
3-13 |
100 |
42-135 |
25 |
||||
PYD-1200 |
60 |
3-13 |
50 |
18-105 |
25.6 |
||||
PYB-1750 |
1750 |
250 |
25-50 |
215 |
280-480 |
245 |
160 |
55.5 |
6020*2948 *4190 |
PYZ-1750 |
215 |
10-30 |
185 |
115-320 |
51 |
||||
PYD-1750 |
100 |
5-15 |
85 |
75-230 |
50.5 |
||||
PYB-2200 |
2200 |
350 |
30-60 |
300 |
590-1000 |
220 |
260-280 |
84 |
7705*3432 *4842 |
PYZ-2200 |
275 |
10-30 |
230 |
200-580 |
85 |
||||
PYD-2200 |
130 |
5-15 |
100 |
120-370 |
85 |
1. Spring Cone Crusher High-efficiency: Industrial pegson spring cone crusher heavy equipment uses optimized structure such as, fixed axis, small spherical bearing, which make the efficiency is 5%-15% higher than the efficiency of traditional cone crusher.
2. Spring Cone Crusher Large capacity: The perfect combination of broken stroke, Industrial pegson spring cone crusher heavy equipment broken speed and crushing chamber makes the capacity is 35%-65% larger than the capacity of traditional cone crusher under the same broken cone size.
3.Spring Cone Crusher High quality stone: Industrial pegson spring cone crusher heavy equipment uses special laminated crushing principle resulting in the crushing effect of particles, so that the proportion of cube in the output clearly increased, the flake stone needless reduced and the grain size more uniform.
JHBJGSXS
4. Spring Cone Crusher More smoothly operation: When iron and other hard objects that cannot be broken into the machine,Industrial pegson spring cone crusher heavy equipment the over iron protection equipment will released the objects and then reset immediately.
5. Spring Cone Crusher Multi-split hydraulic lubrication control system can ensure the double protection of the bush and overload protection.
JHVAJSHGVC
Industrial pegson spring cone crusher heavy equipment pyd 1200 with high-efficiency and hydraulic pressure was widely used in mining, concrete factory, sand stone making, etc. Spring Cone Crusher's pressure resistance strength is under 350Mpa. And Industrial pegson spring cone crusher heavy equipment pyd 1200 are widely suitable for primary crushing of many kinds of mining and rock such as many kinds of ores, concrete, fireproof material, bauxite, quartzite, corundum, perlite, ironstone, basalt, etc