Saw-tooth Wave Jig Machine
It'snew type of energy saving and high efficient gravity separation equipment and developed based on the traditional Sine Wave Jig Machine. The difference between Saw-tooth Wave Ladder Jig and Sine Wave Jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Bed layer is elevated integrally and slowly dropped with a long effective loose time, allowing significant increase of handling capacity for unit screen surface, decrease of lower limit of grain size recovery and large save of make-up water for undersize fraction.
Industrial tests carried our of Saw-tooth Wave Jig and Sine Wave Jig for comparison showed that the recovery rate for operation of Sawtooth Wave Jig is raised by Sn:3.01%, W:5.5%, Pb:1.63%, Zn:2.04%; The water consumption reduces 30%-40% than traditional Jig. The area reduces 1/3 and the stroke may adjust also.
Technical Specification
Model |
Hutch |
Diaphragm |
Feeding Size (mm) |
Amount of make-up water (m3/t) |
Make-up water pressure (Mpa) |
Capacity (t/h) |
Power (kw) |
Dimensions (mm) |
Weight (Kg) |
||
Shape |
Area (m2) |
Stroke (mm) |
Frequency of Stroke (r/min) |
||||||||
JT0.57-1 |
Trapezoid |
0.57 |
8.5—12 10—17 12-21 |
80-180 |
1-2 |
≥0.05 |
1.5-3 |
1.5 |
1550×780×1530 |
610 |
|
JT1-1 |
Trapezoid |
1.04 |
2-3 |
2.5-5 |
2.2 |
2270×1110×1890 |
900 |
||||
JT2-2 |
Rectangle |
2.28 |
2-4 |
5-10 |
3 |
3225×1550×2050 |
1640 |
||||
JT3-1 |
Trapezoid |
3 |
12-30 |
50-125 |
3-6 |
7.5-15 |
5.5 |
2745×2000×3030 |
3085 |
||
JT4-2 |
Rectangle |
4 |
25-57 |
4-8 |
8-20 |
7.5 |
4240×1990×2750 |
3098 |
|||
JT4-2S |
Rectangle |
4 |
25-57 |
4-8 |
8-20 |
4×2 |
4240×1990×2750 |
3500 |
|||
JT5-2 |
Trapezoid |
4.86 |
12-30 |
3-6 |
12-25 |
7.5 |
3600×2000×2600 |
4500 |
|||
Application
Indonesia 200tph Manganese Ore Processing Project
Other Mining Equipment We Build
Working Site
Ms. Silvia Wen
Mineral Processing Equipment is a kind of large porous ceramic disc which is fired by inorganic membrane making technology.low price manganese ore mining machine jig separator has following characteristics:large filter area.high intensity and even aperture.Besides,the aperture size can be adjusted according to actual demands.Mineral Processing Equipment is alumina,it has good resistance to acid and alkali.After a period of application,the ceramic filter board can be cleaned by cycle reverse cleaning,ultrasonic and chemical cleaning agent and so on,to let the boards work with high efficiency.
JHBHHHHG
Mineral Processing Equipment is a kind of equipment which combines the characteristics of spiral concentrator, spiral chute, shaking table and centrifugal concentrator. low price manganese ore mining machine jig separator is the best equipment for mining and mineral processing, especially for beach, riverside, sand beach and Creek channel. Mineral Processing Equipment has the advantages of reasonable structure, simple installation, less land occupation, simple operation, stable ore dressing, low price manganese ore mining machine jig separator clear ore classification, large processing capacity, high efficiency, high concentration ratio of ore dressing, high recovery rate and reliable operation.
JKJBHGB