Specifications
Rod mill Features:
1)High-efficiency
2)Energy saving
3)High quality ISO9001-2000,Big capacity
4)Professinal Manufaturer
Rod Mill--bar Mill Application:
Rod mill are generally used to grind material 1/4 inch and finer, down to the particle size of 20 to 75 microns. To achieve a reasonable efficiency, they must be operated in a closed system, with oversize material continuously being recirculated back into the mill to be reduced. It is widely used in building material,ceramic raw material, chemical industry, etc,can be used both dry and wet.
Rod mills Working Principle
The rod mill is a horizontal rotating device transmitted by the outer gear. The materials are transferred to the grinding chamber through the quill shaft uniformly. There are ladder liner and ripple liner and different specifications of ceramic ball in the chamber. The centrifugal force caused by rotation of barrel brings the ceramic ball to a certain height and impact and grind the materials. The ground materials are discharged through the discharging board thus the grinding process is finished.
|
Type
|
Diameter |
Length |
Speed |
Weight |
in size (mm) |
Out size (mm) |
Capacity t/h |
Power /kw |
Overall /mm |
Weight /kg |
MB0918 |
900 |
1800 |
29-31.3 |
2.3 |
|
0.16-5 |
1.6-6 |
22 |
5900×2365×2015 |
6200 |
MB0924 |
900 |
3400 |
29-35.4 |
3.1 |
2.9-10 |
30 |
5250×2480×2127 |
6600 |
||
MB1224 |
1200 |
2400 |
27-34 |
6.5 |
5.-13 |
55 |
5829×2867×2540 |
13500 |
||
MB1530 |
1500 |
3000 |
26.5-29.5 |
11.5 |
6-25 |
95 |
7635×3329×2749 |
18170 |
||
MB1830 |
1800 |
3000 |
21.6-22.8 |
17.5 |
4.8-28 |
155 |
8007×3873×3023 |
35000 |
||
MB2 |
2100 |
3000 |
19-21 |
23.5 |
12.6-30 |
155 |
9000×2800×3800 |
43000 |
||
130 | ||||||||||
MB2136 |
2100 |
3600 |
19-21
|
23.2 |
15.1-45 |
210 |
9600×2800×3800 |
58000 |
||
|
MB2 736 |
2700 |
3600 |
17.2-18.5 |
|
25-75
|
400
|
10870×6100×4950 |
71500 |
||
MB2740 |
2700 |
4000 |
17.2-18.5 |
51 |
27.2-90 |
420 |
11500×6100×4950 |
73600 |
...
Mineral Processing Equipment is a kind of large porous ceramic disc which is fired by inorganic membrane making technology.Mineral processing equipment rod mill has following characteristics:large filter area.high intensity and even aperture.Besides,the aperture size can be adjusted according to actual demands.Mineral Processing Equipment is alumina,it has good resistance to acid and alkali.After a period of application,the ceramic filter board can be cleaned by cycle reverse cleaning,ultrasonic and chemical cleaning agent and so on,to let the boards work with high efficiency.
JHBHHHHG
Mineral Processing Equipment is a kind of equipment which combines the characteristics of spiral concentrator, spiral chute, shaking table and centrifugal concentrator. Mineral processing equipment rod mill is the best equipment for mining and mineral processing, especially for beach, riverside, sand beach and Creek channel. Mineral Processing Equipment has the advantages of reasonable structure, simple installation, less land occupation, simple operation, stable ore dressing, Mineral processing equipment rod mill clear ore classification, large processing capacity, high efficiency, high concentration ratio of ore dressing, high recovery rate and reliable operation.
JKJBHGB