1) Sand making machine is used in the third or fourth stage .
2) Sand making machine Feed rates: 40 - 360MT/h.
3) Sand making machine drive power: 60 - 400kW.
4) Sand making machine Size of the feeding material: 35 - 60mm.
5) Sand making machine is used widely in many different raw material
6) Sand making machine is Usually used to make man-made sand.
7) Sand making machine Can crush rock into small pieces in just 0 - 15mm.
8) Sand making machine is suitable for crushing hard rock into sand in good quality.
9) Sand making machine High quality, low cost and easy to operation.
10) Sand making machine is Better than other crusher in versatility, capacity of production, installation, smoothness of operation, reliability and hassle-free performance.
Models of Sand Making Machine available:
Model |
Max size of feeding mateial (mm) |
Power(Kw) |
Impeller speed (r/min) |
Output |
Dimension of material discharged |
Weight(T) |
PCL-600 |
30 |
2×30 |
2000-3000 |
12-30 |
3000×1500×2050 |
5.6 |
PCL-750 |
35 |
2×45 |
1500-2500 |
25-55 |
3300×1800×2440 |
7.3 |
PCL-900 |
40 |
2×55 |
1200-2000 |
55-100 |
3600×2140×2620 |
12.1 |
PCL-900B |
40 |
2×75 |
1000-1450 |
65-130 |
3600×2140×2620 |
13.6 |
PCL-1050 |
45 |
2×(90-110) |
1000-1700 |
100-160 |
4480×2450×3906 |
16.9 |
PCL-1250 |
45 |
2×(132-180) |
850-1450 |
160-300 |
4520×2640×3100 |
22 |
PCL-1350 |
50 |
2×(180-220) |
800-1193 |
200-360 |
5340×2940×3650 |
26 |
The entire center feeding: Sand Making Machine Material falls the feed hopper, then enters the high-speed rotary sling wheel from center feeding hole, which is speeded immediately in the sling wheel. Easy Operation Sand Making Machine The speed can reach several dozens times of the gravity acceleration. Then Sand making machine is thrown from the sling wheel. First, Sand Making Machine is crushed with other rebounded material fell freely from the sling wheel.
JHGJHVJHD
Then both of them are impacted to the material lining (rock-rock) or strike back block (rock-iron), rebounded and stroke to the Good of eddy cavity of Sand making machine in the inclined-up direction. Then Easy Operation Sand Making Machine moves along deflection-down, and forms a continuous material curtain with the material from the impellers passage. Just like this, the material is stroke, rubbed, crushed twice or more, then is discharged from the down discharging hole. There is little loss for medium-sized and fine sand and stone powder. Sand Making Machine The grade and the fineness of the sand for construction after being washed can be up to the national standards, such as sand for construction and cobble and broken stones for construction. There are no other wear parts except the screen mesh. Easy Operation Sand Making Machine has longer service life and little maintenance chance.
JHGVHGCD