Well designed sand making machine for mining industry manufacturer of China
1. Introduction of sand making machine:
Yuhui PCL vertical shaft impact crusher (namely, sand making machine) is the specialized machine with international advanced level. Technology and modern processing make it a Well designed sand making machine for mining industry manufacturer of China role in this industry. It is widely used for artificial sand, in metal and non-metal ores, cement, refractory material, bauxite, silicon carbide, glass material, building material. The finished sand has even particle size, high compressive strength, and high-purity. The stones fall from the top of the machine, and then it is divided into two parts by material-dividing plate. One enters into high-speed rotating impellor through the center of material-dividing plate. The other falls down from outside of material-dividing plate. Under the action of the high speed centrifugal force, the stones crushed the others distributed around the impeller in the form of umbrella. After the stones impact each other, the addying motion is formed between the impeller and main case to bring about many times’ mutual impacting, rubbing, and crushing till the granularity required is achieved
2. Features of sand making machine:
Sand Making machine (sand maker) is a new-type one, which is used widely to substitute Cone Crusher, Ball Mill and Rod Mill-New and unique construction and stable operation
-Energy-saving, higher capacity, higher crushing ratio-Low noise, less dust pollution-Cubical product and great sand pile density-The stones can product the base of machine during the production
-Some wearing parts are made of super hard and wear resistant materials. They have the small bulk and light weight, so that they can be changed easily.
3. Main Technical Parameters:
Model |
Impeller speed(r/min) |
Max. Feeding size(mm) |
Capacity (t/h) |
Power (kw) |
Weight (including motor (t) |
Overall dimension (mm) |
600 |
2000-3000 |
30 |
12-30 |
2×30 |
5.6 |
2800×Φ1500×2030 |
750 |
1500-2500 |
35 |
25-55 |
2×45 |
7.3 |
3300×Φ1800×2440 |
900A |
1200-2000 |
40 |
55-100 |
2×55 |
12.1 |
3750×Φ2120×2660 |
900B |
1000-1450 |
40 |
65-130 |
2×75 |
13.6 |
3750×Φ2300×2090 |
1050 |
1000-1700 |
45 |
100-160 |
2×(90-110) |
16.9 |
4480×Φ2450×2906 |
1250 |
850-1450 |
45 |
160-300 |
2×(132-180) |
22 |
4563×Φ2650×3716 |
1350 |
800-1193 |
50 |
200-360 |
2×(180-220) |
26 |
5340×Φ2940×3650 |
The entire center feeding: Sand Making Machine Material falls the feed hopper, then enters the high-speed rotary sling wheel from center feeding hole, which is speeded immediately in the sling wheel. Well designed sand making machine for mining industry manufacturer of China The speed can reach several dozens times of the gravity acceleration. Then Sand making machine is thrown from the sling wheel. First, Sand Making Machine is crushed with other rebounded material fell freely from the sling wheel.
JHGJHVJHD
Then both of them are impacted to the material lining (rock-rock) or strike back block (rock-iron), rebounded and stroke to the Good of eddy cavity of Sand making machine in the inclined-up direction. Then Well designed sand making machine for mining industry manufacturer of China moves along deflection-down, and forms a continuous material curtain with the material from the impellers passage. Just like this, the material is stroke, rubbed, crushed twice or more, then is discharged from the down discharging hole. There is little loss for medium-sized and fine sand and stone powder. Sand Making Machine The grade and the fineness of the sand for construction after being washed can be up to the national standards, such as sand for construction and cobble and broken stones for construction. There are no other wear parts except the screen mesh. Well designed sand making machine for mining industry manufacturer of China has longer service life and little maintenance chance.
JHGVHGCD