Good Quality sand lime brick making machine
1.Introduction of Sand making machine:
Sand making machine is also called vertical shaft impact crusher, which is widely used in mine, Sandstone,
bauxite, quartz sand,etc. It has the features of high crushing ratio, energy-saving; crushing mid-hardness and ultrahard materials; final product is cubic; low environment pollution. offer Hot sale sand making machine-sand maker/ISO/CE.
2.Features of sand making machine:
1) Reasonable and simple structure,low operating cost;Lower failure rate
2) Low energy consumption, high yield,big crushing ratio;
3) Little affected by the moisture content;Easy maintenance.
3.Advantages of Sand Making Machine:
1. High crushing ratio-95%;
2. Easy to install; easy maintence; low investment
3. The granularity of final product:3-5mm 60% ;1--3mm 30%;
4. Widely used in sand making production line;road,etc.
4.Maintenance of sand making machine:
1. Regularly stop to open the observation door observation.
2. the the Sand transmission triangle tape tension force size should be adjusted as appropriate to ensure that the triangular tape Force uniform, two-motor drive, both sides of the triangle tape packet matching, so that
each group length as much as possible, square to ensure that the sand making equipment is energy efficient;
3. Check the machine and add the grease often.
4. Sand lubrication for dry oil lubrication, the amount of the bearing cavity half to two-thirds of each work of a group, add the right amount of grease.
5. Staff should stay away from the equipment before operating For more on the repair, you must power-off.
5.Technical parameter of Sand making machine:
Model |
Impeller Speed |
Max.Feed size |
Capacity |
Power |
Weight |
Overall Dimensions |
600 |
2000-3000 |
30 |
12-30 |
2x30 |
5.6 |
2800x1500x2030 |
750 |
1500-2500 |
35 |
25-55 |
2x45 |
7.3 |
3300x1800x2440 |
900A |
1200-2000 |
40 |
55-100 |
2x55 |
12.1 |
3750x2120x2660 |
900B |
1000-1450 |
40 |
65-130 |
2x75 |
13.6 |
3750x2300x2090 |
1050 |
1000-1700 |
45 |
100-160 |
2x(90-110) |
16.9 |
4480x2450x2906 |
1250 |
850-1450 |
45 |
160-300 |
2x(132-180) |
22 |
4560x2650x3716 |
1350 |
800-1193 |
50 |
200-360 |
2x(180-220) |
26 |
5340x2940x3650 |
The entire center feeding: Sand Making Machine Material falls the feed hopper, then enters the high-speed rotary sling wheel from center feeding hole, which is speeded immediately in the sling wheel. Good Quality sand lime brick making machine The speed can reach several dozens times of the gravity acceleration. Then Sand making machine is thrown from the sling wheel. First, Sand Making Machine is crushed with other rebounded material fell freely from the sling wheel.
JHGJHVJHD
Then both of them are impacted to the material lining (rock-rock) or strike back block (rock-iron), rebounded and stroke to the Good of eddy cavity of Sand making machine in the inclined-up direction. Then Good Quality sand lime brick making machine moves along deflection-down, and forms a continuous material curtain with the material from the impellers passage. Just like this, the material is stroke, rubbed, crushed twice or more, then is discharged from the down discharging hole. There is little loss for medium-sized and fine sand and stone powder. Sand Making Machine The grade and the fineness of the sand for construction after being washed can be up to the national standards, such as sand for construction and cobble and broken stones for construction. There are no other wear parts except the screen mesh. Good Quality sand lime brick making machine has longer service life and little maintenance chance.
JHGVHGCD