Hot sale glass crusher machine mill of the impact crushers
Introduction
PF series of impact crusher is widely applied in mining, transportation, energy, construction and chemical industry. It is used in crushing all kinds of materials whose granularity is below 500mm,and the pressure resistance around 360mpa. It has the features of big crushing rate, efficient crushing, easy maintenance and cubic shape with final product.
Impact crushers are ideal choice for crushing and screening, it is more suitable for processing granite, limestone, bank gravel. The granularity of 80% finished products is less than 30mm.
Working principle of mill of the impact crushers
The materials are crushed via impact energy produced in the impact crusher. When the materials enter the zone of the board hammer, they are flung into the impact equipments via the high-speed impact of the board hammer. These materials will be re-crushed after rebounding into the scale board. The large materials are crushed into small pieces until it becomes the specified granularities. The end products come out from the base of the impact crusher.
Main technical parameters of mill of the impact crushers
Type |
Spec. |
Feeder Opening(mm) |
Max feeding size(mm) |
Crushing |
Motor |
PF0607 |
Φ644X740 |
320X770 |
100 |
10-20 |
30 |
PF0807 |
Φ850X700 |
400X730 |
300 |
15-30 |
30-45 |
PF1008 |
Φ1000X800 |
400X830 |
300 |
30-50 |
37-55 |
PF-1010 |
Φ1000×1050 |
400×1080 |
350 |
50-90 |
55-75 |
PF-1210 |
Φ1250×1050 |
400×1080 |
350 |
70-120 |
110-132 |
PF1212 |
Φ1250X1250 |
400X1300 |
350 |
100-150 |
132-160 |
PF-1214 |
Φ1250×1400 |
400×1430 |
350 |
130-180 |
160-200 |
PF-1315 |
Φ1320×1500 |
860X1520 |
500 |
160-250 |
180-260 |
PF-1320 |
Φ1320×2000 |
860×2030 |
500 |
300-350 |
300-375 |
The entire center feeding: Sand Making Machine Material falls the feed hopper, then enters the high-speed rotary sling wheel from center feeding hole, which is speeded immediately in the sling wheel. Hot sale glass crusher machine mill of the impact crushers The speed can reach several dozens times of the gravity acceleration. Then Sand making machine is thrown from the sling wheel. First, Sand Making Machine is crushed with other rebounded material fell freely from the sling wheel.
JHGJHVJHD
Then both of them are impacted to the material lining (rock-rock) or strike back block (rock-iron), rebounded and stroke to the Good of eddy cavity of Sand making machine in the inclined-up direction. Then Hot sale glass crusher machine mill of the impact crushers moves along deflection-down, and forms a continuous material curtain with the material from the impellers passage. Just like this, the material is stroke, rubbed, crushed twice or more, then is discharged from the down discharging hole. There is little loss for medium-sized and fine sand and stone powder. Sand Making Machine The grade and the fineness of the sand for construction after being washed can be up to the national standards, such as sand for construction and cobble and broken stones for construction. There are no other wear parts except the screen mesh. Hot sale glass crusher machine mill of the impact crushers has longer service life and little maintenance chance.
JHGVHGCD