JYS Series High Efficiency Sand Making Machine Feature & Technical Advantages:
1)High efficiency and large capacity -from 50-500t/h.Compared with the old type under the same power,the capacity was increased by 35%,meanwhile it is operated stably and reliably.
2)Low wear parts consuming-Because of the most ideal impact crushing,impact angle,and the reasonable design for impacting speed,this series has a 30% lower operating cost than the old types,which sequentially reduce the using cost and increase the profit ratio directly.
3)The granula of final product is hexahedron with good shape,reasonable graded,which is specially good use for machine-made sand and stone material shaping.Proved by many clients' use,this series has a 30% higher combined efficiency than other types of sand making & shaping equiping with the same power.
JYS Series High Efficiency Sand Making Machine Specification:
| Model | Rolling Speed(r/min) | Max.Feed Size(mm) | Power(kw) | Capacity(t/h) | Overall Dimention(m) |
| JYS-6020 | 1460-2100 | 30 | 60-110 | 60-140 | 3.60×2.15×2.80 |
| JYS-8623 | 1380-1810 | 40 | 150-220 | 120-280 | 4.52×2.58×3.30 |
| JYS-9928 | 1200-1580 | 40 | 180-320 | 150-360 | 4.72×2.70×3.46 |
| JYS-1238 | 1100-1360 | 40 | 220-400 | 200-400 | 4.98×2.97×3.68 |
JYT Series Energy-Saving And Combined Fine Sand Making Machine-(Advanced Sand Making, Stone Crushing & Shaping Machine With the latest Design)
| Model | Rolling Speed(r/min) | Max.Feed Size(mm) | Power(kw) | Capacity(t/h) | Overall Dimention(m) |
| JYT2811 | 1180-1480 | 40 | 180-320 | 150-400 | 4.60×2.68×3.20 |
Note:If there is any change about specification and dimension,which is subject to the user's manual with good sent out;Capacity is relevant to the character of raw material and feeding size.
The entire center feeding: Sand Making Machine Material falls the feed hopper, then enters the high-speed rotary sling wheel from center feeding hole, which is speeded immediately in the sling wheel. Sand and Gravel Making Equipment The speed can reach several dozens times of the gravity acceleration. Then Sand making machine is thrown from the sling wheel. First, Sand Making Machine is crushed with other rebounded material fell freely from the sling wheel.
JHGJHVJHD
Then both of them are impacted to the material lining (rock-rock) or strike back block (rock-iron), rebounded and stroke to the Good of eddy cavity of Sand making machine in the inclined-up direction. Then Sand and Gravel Making Equipment moves along deflection-down, and forms a continuous material curtain with the material from the impellers passage. Just like this, the material is stroke, rubbed, crushed twice or more, then is discharged from the down discharging hole. There is little loss for medium-sized and fine sand and stone powder. Sand Making Machine The grade and the fineness of the sand for construction after being washed can be up to the national standards, such as sand for construction and cobble and broken stones for construction. There are no other wear parts except the screen mesh. Sand and Gravel Making Equipment has longer service life and little maintenance chance.
JHGVHGCD