The hammer mill crushes through the collisions between high-speed hammer and materiasl, and the hammer mills have good quality features like simple structure, high reduction ration, high efficiency, etc. The PC hammer mills were suitable for both dry and wet crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic, construction material, road building, and petroleum & chemical industries. 
Operating principle of Hammer Crusher:
The motor drives the rotor rotated of the hammer crusher at a high speed through the belt, and on the rotor there are series of hammers. When the materials get into the working area of hammers, they are crushed by the rotating hammers of the hammer crusher with high rotation speed, the products which are crushed to meet the required size can be discharged by the outlet and become the final products, the large size products are brought back to the crushed area by the hammers of the hammer crusher for being recrushed until they reached the required size.
Technical Data of Hammer Crusher:
Name |
Model |
Max feed size (mm) |
Capacity (t/h) |
Motor Power(kw) |
Weight (t) |
Hammer Crusher |
PC400×300 |
30 |
5-8 |
11 |
1.5 |
PC600×400 |
100 |
10-15 |
18.5 |
3 |
|
PC800×600 |
150 |
20-25 |
55 |
7 |
|
PC800×1000 |
280 |
20-50 |
110 |
12 |
|
Circuit Type |
PCH0606 |
200 |
18-30 |
30 |
17 |
PCH0808 |
250 |
30-50 |
45 |
29 |
|
PCH1010 |
300 |
45-80 |
90 |
52 |
Pics of our crusher
The series of Hammer Mill Crusher have the features of small volume ,light weight ,simple structure ,easy operation and maintenance ,high ratio of crushing ,too little crush , even product size ,high producing capacity .hammer crusher sold well in Mid-East & Africa is suitable for crushing all the materials of brittle,medium hard ,and compressive strength 150 Mpa.The features include great hammerhead work ,adoption of new technology casting ,with wear and impact resistance. This solve the problems of crushing plant dust pollution and gray body leakage.
HJBJHSDG
Hammer Mill Crusher for crushing all kinds of hard and abrasive weak materials. hammer crusher sold well in Mid-East & Africa The compressive strength of the material does not exceed 100MPa, moisture content less than 15%. Material to be broken coal, salt, chalk, gypsum, brick, limestone and so on. Also used for crushing fiber structure, Hammer Mill Crusher strong flexibility and toughness of broken wood, paper or broken asbestos cement waste to recover asbestos fibers and so on. In addition, hammer crusher sold well in Mid-East & Africa not only used for crushing production line, sand production line, but also in mineral processing production line replacement cone crusher.
HBDHSD