Widely use PC300X400 capacity 3tons to 10tons per hour hammer crusher,hammer mill
Product DescriptionAdvantages of hammer crusher
1.High production and high crushing ratio.
2Low power consumption, homogeneous particle size.
3.Simple, compact and light mechanical structure.
4.Low investment cost, easy management.
Hammer crusher Description:
hammer mill machine is applicable for both dry and wet crushing.grinder hammer mill machine is widely used for medium or fine crushing for medium hard and brittle materials by departments of mine, cement, coal,building material, metallurgy, chemical industry, road construction,gas chemical industry and thermal power generation, etc. Coal gangue,coke, slag, limestone, phosphate rock, salt, whiting, gypsum stains,alum, brick and tile, etc. can be crushed by this equipment. The compression strength of the materials shall not exceed 100MPa, while the moisture content shall be lower than 15%.
Application of hammer crusher
Hammer crusher is mainly suitable for crushing various soft and medium-hard ore, whose compression strength is not higher than 320MPa, such as coal, salt, chalk, gypsum, blocks, limestone, glasses, and phosphate, etc.
This grinder hammer mill machine can be also used for crushing chips and paper with fiber structure and strong elasticity and ductility, or recycling asbestos fiber by crushing wastes of asbestos cement, etc. Gap between the gratings areadjustable to change grain size of the discharge, so as to meet different requirements of the customers.
Technical Parameter
The technical parameters of Hammer crusher
Model |
Rotor Diameter (mm) |
Roter Length (mm) |
Hammer Quantity |
Max Feeding (mm) |
Discharging (mm) |
Capacity (t/h) |
Power (kw) |
Motor Model |
REV (r/min) |
Machine Size (mm) |
PC300×400 |
400 |
300 |
16 |
3-8 |
11 |
1100 |
855×795×862 |
|||
PC400×600 |
600 |
400 |
20 |
8-15 |
18.5 |
1000 |
1155×1100×1255 |
|||
PC600×800 |
800 |
600 |
28 |
15-30 |
45 |
900 |
2360×1500×1580 |
Product Photos
Company Information
The series of Hammer Mill Crusher have the features of small volume ,light weight ,simple structure ,easy operation and maintenance ,high ratio of crushing ,too little crush , even product size ,high producing capacity .Widely use PC300X400 capacity 3tons to 10tons per hour hammer crusher,hammer mill is suitable for crushing all the materials of brittle,medium hard ,and compressive strength 150 Mpa.The features include great hammerhead work ,adoption of new technology casting ,with wear and impact resistance. This solve the problems of crushing plant dust pollution and gray body leakage.
HJBJHSDG
Hammer Mill Crusher for crushing all kinds of hard and abrasive weak materials. Widely use PC300X400 capacity 3tons to 10tons per hour hammer crusher,hammer mill The compressive strength of the material does not exceed 100MPa, moisture content less than 15%. Material to be broken coal, salt, chalk, gypsum, brick, limestone and so on. Also used for crushing fiber structure, Hammer Mill Crusher strong flexibility and toughness of broken wood, paper or broken asbestos cement waste to recover asbestos fibers and so on. In addition, Widely use PC300X400 capacity 3tons to 10tons per hour hammer crusher,hammer mill not only used for crushing production line, sand production line, but also in mineral processing production line replacement cone crusher.
HBDHSD