Enclosed hanged disk feeder, customized allowance vibrating feeder Jinpeng Mining Machinery CO., LTD
Professional mineral processing design, equipment production,installation and conmissioning institue.
Tel: 0086-Enclosed hanged disk feeder, customized allowance vibrating feeder3410275 Enclosed hanged disk feeder, customized allowance vibrating feeder89859081 Skype:lee.vicky198
Hot sell vibrating swaying feeder used for ore feeding
Swaying feeders are widely used in mining. In the mining line, swaying feeder is generally installed in front of the primary crusher. It can send the ore to crusher evenly and continuously.
Swaying feeder can effectively control the feeding capacity to match with the capacity of the whole crushing palnt.
Notes: The motor can be replaced by speed adjustment motor to adjust the feeding capacity according to the customers requirments.
1.body 2.connecting rod 3.gear reducer, 4.flexible coupling, 5.the motor
The device is generally installed in the hopper lower part of the discharge, the materials landed in the body. While working, the motor drives reducer through coupling, and through eccentric disk so that the equipment be placed back and forth movement, which is expected to complete the regulated feed. By adjusting the eccentric plate on the scale, the charge is adjustable.
Inlet mouth (L×W) (mm) |
400×400 |
|
Eccentric journey (mm) |
0~170 |
|
Swing numbers (nth/min) |
47 |
|
Feeding particle max. (mm) |
35 |
|
Capacity (t/h) |
12 |
|
Motor |
Model |
Y90S-4 |
Power |
1.1kw |
|
Rotation speed |
1400r/min |
|
Usually used in the following similiar process of gold,silver,copper, lead zinc, molybdenum and so on.
1, double-check equipment and hopper bolts fastening the mouth if there is loose.
2, check whether the ministries lubrication point is full of lubricating oil.
rolling bearing grease filling capacity of the cavity 2 / 3.
reducer injects within 30 # engine oil, the oil reaches worm gear tooth surface high degree of 1.5 times.
3, adjust the distance between flashboard to swing according to the feeding particle requirements.
4, when equipment is starting, the body does not allow too much of the material, it should be the normal operation of equipment before it can start feeding.
5, the first stop should be to stop feeding, the electrical motor can be closure after all the materials are discharged.
Provide ore dressing experiment,process design and onsite engineering service.
Welcome to visit our lab, design institute and factory!
Our Enclosed hanged disk feeder, customized allowance vibrating feeder adopts two vibrating motors rather than the normal motor plus vibration exciter structure as the vibrating device. Vibrating Screen Feedere becomes simpler, smaller, and lighter. The work noise is also very lower. The reliable and energy-saving motors can feed material stably. Enclosed hanged disk feeder, customized allowance vibrating feeder has much bigger conveying capacity and is easy to be installed and maintained.
HBJFCHR
In our vibrating feeder, Vibrating Screen Feeder are rotating synchronically and oppositely. Thus the vibration absorber supported feeder can move linearly, Enclosed hanged disk feeder, customized allowance vibrating feeder and the material can move forward and get loose immediately once fall into the trough.
SKHCBFV
Vibrating Screen Feeder is designed for the sieving of solid-liquid materials. Vibrating Screen Feeder vertical motor, which is installed eccentric hammers on the top and bottom, is regarded as a vibratory source. The eccentric hammers change rotation into horizontal, vertical and inclined movement, and then pass the movement to the sieving surface. Adjusting the phase angle on the top and Enclosed hanged disk feeder, customized allowance vibrating feeder can change trajectories of the materials on the sieve.