Mini GZV Vibratory Feeder for Laboratory Use
Introduction of laboratory Vibrating Feeder
Electromagnetic feeder is a new type of feeding equipment , using electromagnetic exciter as the vibration source to drive hopper trough work .
The feeder machine is mainly used for transmitting massive, granular and powdered materials from storage silo to the receiving devices , feeding material equably ,continuously ,quantificationally .
By equiped with a screen cloth , it can also act as a tiny vibrating screen machine .
Features of Smll Lab Vibrating Feeder
1. small size , light weight ,
2. low noise , low energy consumption .
3. automatic feeding , quantitative feeding
4. centralized control , stepless adjustment feeding speed
5. can be operated on working table
6. special design available according to customer's requirement
Different Model GZV Feeder
| Model | GZV1 | GZV2 | GZV3 | GZV4 | GZV5 | GZV6 |
| Capacity(t/h) | 0.1 | 0.5 | 1 | 2 | 4 | 6 |
| Double amplitude | 1.5 | |||||
| Rotating speed(r/min) | 3000 | |||||
| Voltage (V) | 220 | |||||
| Power(W) | 5 | 8 | 20 | 25 | 30 | 50 |
| Weight(kg) | 7 | 10 | 17 | 22 | 32 | 53 |
Our mini gzv vibratory feeder for laboratory use adopts two vibrating motors rather than the normal motor plus vibration exciter structure as the vibrating device. Vibrating Screen Feedere becomes simpler, smaller, and lighter. The work noise is also very lower. The reliable and energy-saving motors can feed material stably. mini gzv vibratory feeder for laboratory use has much bigger conveying capacity and is easy to be installed and maintained.
HBJFCHR
In our vibrating feeder, Vibrating Screen Feeder are rotating synchronically and oppositely. Thus the vibration absorber supported feeder can move linearly, mini gzv vibratory feeder for laboratory use and the material can move forward and get loose immediately once fall into the trough.
SKHCBFV
Vibrating Screen Feeder is designed for the sieving of solid-liquid materials. Vibrating Screen Feeder vertical motor, which is installed eccentric hammers on the top and bottom, is regarded as a vibratory source. The eccentric hammers change rotation into horizontal, vertical and inclined movement, and then pass the movement to the sieving surface. Adjusting the phase angle on the top and mini gzv vibratory feeder for laboratory use can change trajectories of the materials on the sieve.