I. YK Series rock vibrating feederTechnical Data:
II.Features and Technology Advantages of rock vibrating feeder:
1.Use the unique eccentric structure to produce powerful vibrating force.
2.The beam and case of screen are connected with high strength bolts without welding.
3.Simple structure and easy maintenance.
4.Adopting tire coupling and soft connection makes operation smooth.
5.High screen efficiency, great capacity and SANME rock vibrating feeder service life.
III.Structure of rock vibrating feeder:
Inclined vibrating screen is mainly composed of sieving box, mesh, vibrator, shock-mitigating device, underframe and so on. It adopts drum-type eccentric shaft exciter and partial block to adjust the amplitude, and installs the vibrator on the lateral plate of the sieving box, driven by the motor which makes the exciter swing speedily to produce centrifugal force and thus compels the sieving box vibrating. The lateral plate is made of the high quality steel plate while the side plate, beam and underframe of vibrators are connected by high strength bolts or ring-grooved rivet.
IV.Working principle of rock vibrating feeder:
The motor makes the exciter rotating speedily through the V-belt. Besides, the great centrifugal force produced by rotating eccentric block makes the sieve box do circular motion of some amplitude, together with the impulse transmitted through sieve box on the slope surface, which makes the materials on the screen surface successively tossed forward. Thus the classification is achieved in the process of thrown-up as materials with smaller size than the mesh is falling through.
V.Usage and Maintenance of rock vibrating feeder:
Inclined vibrating screen should be started with empty load. Material is loaded after the machine works smoothly. Before stopping, the materials shall be totally discharged.Please observe the running state of screens constantly during the operation. If there is any unusual condition, should repair the breakdown.
|
YK Series Inclined Vibrating Screen |
YK Series Inclined Vibrating Screen |
VI.SANME Factory & Office:
|
|
|
|
|
Our SANME rock vibrating feeder adopts two vibrating motors rather than the normal motor plus vibration exciter structure as the vibrating device. Vibrating Screen Feedere becomes simpler, smaller, and lighter. The work noise is also very lower. The reliable and energy-saving motors can feed material stably. SANME rock vibrating feeder has much bigger conveying capacity and is easy to be installed and maintained.
HBJFCHR
In our vibrating feeder, Vibrating Screen Feeder are rotating synchronically and oppositely. Thus the vibration absorber supported feeder can move linearly, SANME rock vibrating feeder and the material can move forward and get loose immediately once fall into the trough.
SKHCBFV
Vibrating Screen Feeder is designed for the sieving of solid-liquid materials. Vibrating Screen Feeder vertical motor, which is installed eccentric hammers on the top and bottom, is regarded as a vibratory source. The eccentric hammers change rotation into horizontal, vertical and inclined movement, and then pass the movement to the sieving surface. Adjusting the phase angle on the top and SANME rock vibrating feeder can change trajectories of the materials on the sieve.